The popularity of teak in the manufacture of furniture can be attributed to its visual appeal and durability. The surface of the wood has a golden brown appearance which is ideal for both modern and traditional style homes. The material is naturally dense and resistant to weather damage, so you can place the furniture indoors or outdoors. On the other hand, teak furniture requires regular cleaning and oiling as part of routine maintenance. This will prolong the service life of the wood and preserve the golden colour. Here are simple guidelines to help you clean and oil your teak furniture at home.
Choosing the Oil
There are different types of oil that are ideal for treating teak furniture. The most popular options are teak, Tung and linseed oil products. Teak oil is extracted from natural teak; the wood produces this oil to protect the untreated lumber. This choice is ideal because it has exceptional compatibility with the furniture. If you opt for this material, consider products with UV protection and mildew retarding additives for better protection. Tung oil is ideal because it forms a hard coat after direct exposure to air. The layer created is highly protective, transparent and long-lasting. Linseed oil is not extremely protective, but it has an appealing look that displays the wood's natural grain.
Preparing the Surface
You will need to prepare the surface of your teak furniture before applying your selected oil. This involves cleaning the surface in order to improve adherence and enhance the aesthetics. In ideal circumstances, you can clean teak furniture with a damp cloth. This is sufficient for removing dust and general debris as long as you have always maintained a regular cleaning routine. Do not utilise a pressure washer to clean the wood even when there is a lot of accumulated dust. Instead, use a garden hose to avoid damaging the teak. If you have neglected the furniture, you might notice stains on the surface. You can gently sand away the imperfection with fine grit sandpaper. Allow the surface to dry completely before proceeding with the oiling phase.
Applying the Oil
You should check the recommendations provided by the oil manufacturer before proceeding with the application. Ideally, these products can be diluted to required proportions using mineral oils and applied using a normal paint brush. For the best results, allow the fluid to soak into the wood until the surface is saturated. If excess oil drips on other surfaces, dampen a cloth with mineral oils and wipe the residue carefully.